Source (LMR) Exhibition SWPF 2015 / Meiden / CERAFILTEC
COMPANY
Cembrane
PICTURE/DRAWING
SINGLE TOWER DESIGN MADE IN PLASTIC & STEEL
CORE SPEC’S
Standard tower with 1 up to 12
modules,
Integrated aerator base on the
bottom,
Module housing in steel,
External piping in plastic,
Specials: Hydraulical design
with up to 1,000 LMH, tower
requires no surrounding frame
Meiden
Two standard racks with single
or double membrane stack,
Integrated aerator base on the
bottom,
External piping in plastic or steel,
Specials: Single ceramic plates
can be separately (dis)assembled
directly into frame
Source: Meiden
meidensha.co.jp
Ceraflo
Integrated aerator module on
the bottom,
Module housing in plastic,
Tower base and module holders
(threaded rods) in steel,
Integrated top module for equal
flow distribution (pressurized
version)
Specials: Submerged and
pressurized version, tower
requires no surrounding frame
ItN Water
Filtration
Two standard sizes with 4 towers
each with 10 modules (total 40
modules) or with 4 towers
each with 14 modules (total 56
modules),
Integrated aerator base on the
bottom,
Integrated main header and
single sprinkler line,
Specials: Frame with
integrated 5 mm screen on
bottom/sides/top, frame is used
as internal filtered water lines
Source: Published poster
Exhibition SWPF 2013
Source: Cembrane
cembrane.com
Source: Ceraflo
ceraflo.cn
ItN Water
Filtration
Standard tower with 2 up to 16
modules,
Integrated aerator base on the
bottom,
Module housing in plastic,
Tower base, top and module
holders (threaded rods with
tension springs) in steel,
Specials: Membranes not
covered on two sides, internal
filtered water piping, tower
requires no surrounding frame
Source: Published poster
Exhibition SWPF 2013
COMPANY
PICTURE/DRAWING
RACK DESIGN WITH STEEL FRAME
CORE SPEC’S
COMPANY
CERAFILTEC
PICTURE/DRAWING
SINGLE TOWER DESIGN FULLY MADE IN PLASTIC
CORE SPEC’S
Standard tower with 1 up to 15
modules,
Integrated aerator base on the
bottom or option for separate
installation on the tank bottom,
Module housing in GFRP,
External piping in PVC or PE,
Specials: Hydraulical design
with up to 1,500 LMH, integrated
double sprinkler line on tower top,
internal filtered water piping,
key look system for (dis)assembly,
tower requires no surrounding
frame
Source: CERAFILTEC
cerafiltec.com
OVIVO
Standard tower with 1 up to 10
modules,
Integrated aerator base on the
bottom (part of frame),
Module housing in PE,
Tower frame in PE
Specials: Hydraulical design
with up to 1,000 LMH, self-
standing tower frame enables
separate (dis)assembly of single
modules
Source: Ovivo
ovivowater.com
CERAFILTEC
Several single towers can be
connected with common filtered
water header and double
sprinkler line,
Common header available in
different sizes and connections,
Separate aerator base to be
installed on tank botton,
Specials: Fully modular concept
due to no surrounding frame,
lift and removal option of single
towers (remaining towers stay in
operation)
COMPANY
PICTURE/DRAWING
RACK DESIGN FULLY MADE IN PLASTIC
CORE SPEC’S
Source: CERAFILTEC
cerafiltec.com
* Single tower and rack design providers alphabetically listed
All About Ceramic Flat Membranes
Last update: 07/2018
© 2015
